GICL16 Gear Coupling | Manufacturing Factory Details and Selection Principles

Key Takeaways:

介绍GICL16鼓形齿式联轴器的额定转矩、许可转速、轴孔范围与典型应用。

July 18, 2026 Marusaku Seiko Co. Ltd.
Tags:
GICL16 gear coupling GICL16 crowned tooth coupling gear type coupling fabrication company GICL16 coupling technical parameters and uses
Available Languages
🇬🇧 English

GICL16 Gear Coupling | Manufacturing Factory Details and Selection Principles

In the GICL drum gear coupling series, the GICL16 carries a nominal torque of 250000 N·m at a permissible speed of 1000 r/min, with bore diameters of 200, 220 mm.

The GICL drum gear coupling is a semi-flexible coupling in which crowned external teeth mesh with an internal gear ring, transmitting torque while compensating for shaft misalignment. It is widely used in the shaft drives of metallurgy, mining, lifting and conveying, petrochemical, general machinery, construction machinery and power generation equipment.

Main Technical Parameters

Nominal torque Tn: 250000 N·m
Permissible speed [n]: 1000 r/min
Bore diameter d: 200, 220 mm
Structure: crowned external teeth meshing with an internal gear ring

This size belongs to the heavy low-speed high-torque class, built for heavily loaded shaft systems of large main machines. When selecting, verify that the calculated torque does not exceed the rating, that the working speed stays below the permissible speed, and that the shaft misalignment is within the compensation range.

With its well-designed tooth form and material selection, the GICL16 operates reliably at its load class and, with proper maintenance, delivers a long service life.

In the GICL drum gear coupling series, the GICL16 carries a nominal torque of 250000 N·m at a permissible speed of 1000 r/min, with bore diameters of 200, 220 mm.

The GICL drum gear coupling is a semi-flexible coupling in which crowned external teeth mesh with an internal gear ring, transmitting torque while compensating for shaft misalignment. It is widely used in the shaft drives of metallurgy, mining, lifting and conveying, petrochemical, general machinery, construction machinery and power generation equipment.

Main Technical Parameters

Nominal torque Tn: 250000 N·m
Permissible speed [n]: 1000 r/min
Bore diameter d: 200, 220 mm
Structure: crowned external teeth meshing with an internal gear ring

This size belongs to the heavy low-speed high-torque class, built for heavily loaded shaft systems of large main machines. When selecting, verify that the calculated torque does not exceed the rating, that the working speed stays below the permissible speed, and that the shaft misalignment is within the compensation range.

With its well-designed tooth form and material selection, the GICL16 operates reliably at its load class and, with proper maintenance, delivers a long service life.