In the GICL drum gear coupling series, the GICL18 carries a nominal torque of 355000 N·m at a permissible speed of 900 r/min, with bore diameters of 240, 250, 260 mm.

Drum gear couplings play a key role in mechanical drive systems; the GICL type is chosen across many industries for its high load capacity and good compensation performance, and is a common component on OEM machines.

Main Technical Parameters

Nominal torque Tn: 355000 N·m
Permissible speed [n]: 900 r/min
Bore diameter d: 240, 250, 260 mm
Structure: crowned external teeth meshing with an internal gear ring

This size belongs to the heavy low-speed high-torque class, built for heavily loaded shaft systems of large main machines. When selecting, verify that the calculated torque does not exceed the rating, that the working speed stays below the permissible speed, and that the shaft misalignment is within the compensation range.

With its well-designed tooth form and material selection, the GICL18 operates reliably at its load class and, with proper maintenance, delivers a long service life.