GICL11 Gear Coupling | Design Manufacturer Selection Parameters Guide

Key Takeaways:

介绍GICL11鼓形齿式联轴器的额定转矩、许可转速、轴孔范围与典型应用。

July 13, 2026 Marusaku Seiko Co. Ltd.
Tags:
GICL11 gear coupling GICL11 crowned tooth coupling gear type coupling exporter GICL11 coupling size chart and selection
Available Languages
🇬🇧 English

GICL11 Gear Coupling | Design Manufacturer Selection Parameters Guide

The GICL11 is a size in the GICL drum gear coupling series, rated at 40000 N·m nominal torque with a permissible speed of 1880 r/min and bores of 100, 110, 120 mm.

As an important flexible coupling family, GICL drum gear couplings are widely adopted for their adaptability and stable running, combining the reliability of rigid power transmission with the flexibility of misalignment compensation.

Main Technical Parameters

Nominal torque Tn: 40000 N·m
Permissible speed [n]: 1880 r/min
Bore diameter d: 100, 110, 120 mm
Structure: crowned external teeth meshing with an internal gear ring

This size is aimed at heavy-duty main machines such as rolling mills and mine hoists that demand large torque transmission. When selecting, verify that the calculated torque does not exceed the rating, that the working speed stays below the permissible speed, and that the shaft misalignment is within the compensation range.

With its well-designed tooth form and material selection, the GICL11 operates reliably at its load class and, with proper maintenance, delivers a long service life.

The GICL11 is a size in the GICL drum gear coupling series, rated at 40000 N·m nominal torque with a permissible speed of 1880 r/min and bores of 100, 110, 120 mm.

As an important flexible coupling family, GICL drum gear couplings are widely adopted for their adaptability and stable running, combining the reliability of rigid power transmission with the flexibility of misalignment compensation.

Main Technical Parameters

Nominal torque Tn: 40000 N·m
Permissible speed [n]: 1880 r/min
Bore diameter d: 100, 110, 120 mm
Structure: crowned external teeth meshing with an internal gear ring

This size is aimed at heavy-duty main machines such as rolling mills and mine hoists that demand large torque transmission. When selecting, verify that the calculated torque does not exceed the rating, that the working speed stays below the permissible speed, and that the shaft misalignment is within the compensation range.

With its well-designed tooth form and material selection, the GICL11 operates reliably at its load class and, with proper maintenance, delivers a long service life.