GICL10 Gear Coupling | Source Factory Parameters and Application Range

Key Takeaways:

介绍GICL10鼓形齿式联轴器的额定转矩、许可转速、轴孔范围与典型应用。

July 12, 2026 Marusaku Seiko Co. Ltd.
Tags:
GICL10 gear coupling GICL10 crowned tooth coupling gear type coupling OEM manufacturer GICL10 coupling parameters and working conditions
Available Languages
🇬🇧 English

GICL10 Gear Coupling | Source Factory Parameters and Application Range

In the GICL drum gear coupling series, the GICL10 carries a nominal torque of 31500 N·m at a permissible speed of 2150 r/min, with bore diameters of 80, 85, 90, 95 mm.

The GICL drum gear coupling is a semi-flexible coupling in which crowned external teeth mesh with an internal gear ring, transmitting torque while compensating for shaft misalignment. It is widely used in the shaft drives of metallurgy, mining, lifting and conveying, petrochemical, general machinery, construction machinery and power generation equipment.

Main Technical Parameters

Nominal torque Tn: 31500 N·m
Permissible speed [n]: 2150 r/min
Bore diameter d: 80, 85, 90, 95 mm
Structure: crowned external teeth meshing with an internal gear ring

This size serves medium-load applications, for example auxiliary equipment in metallurgy and mining as well as lifting and conveying machinery. When selecting, verify that the calculated torque does not exceed the rating, that the working speed stays below the permissible speed, and that the shaft misalignment is within the compensation range.

With its well-designed tooth form and material selection, the GICL10 operates reliably at its load class and, with proper maintenance, delivers a long service life.

In the GICL drum gear coupling series, the GICL10 carries a nominal torque of 31500 N·m at a permissible speed of 2150 r/min, with bore diameters of 80, 85, 90, 95 mm.

The GICL drum gear coupling is a semi-flexible coupling in which crowned external teeth mesh with an internal gear ring, transmitting torque while compensating for shaft misalignment. It is widely used in the shaft drives of metallurgy, mining, lifting and conveying, petrochemical, general machinery, construction machinery and power generation equipment.

Main Technical Parameters

Nominal torque Tn: 31500 N·m
Permissible speed [n]: 2150 r/min
Bore diameter d: 80, 85, 90, 95 mm
Structure: crowned external teeth meshing with an internal gear ring

This size serves medium-load applications, for example auxiliary equipment in metallurgy and mining as well as lifting and conveying machinery. When selecting, verify that the calculated torque does not exceed the rating, that the working speed stays below the permissible speed, and that the shaft misalignment is within the compensation range.

With its well-designed tooth form and material selection, the GICL10 operates reliably at its load class and, with proper maintenance, delivers a long service life.