In the GICL drum gear coupling series, the GICL4 carries a nominal torque of 3550 N·m at a permissible speed of 3600 r/min, with bore diameters of 30, 32, 35, 38 mm.

The GICL drum gear coupling is a semi-flexible coupling in which crowned external teeth mesh with an internal gear ring, transmitting torque while compensating for shaft misalignment. It is widely used in the shaft drives of metallurgy, mining, lifting and conveying, petrochemical, general machinery, construction machinery and power generation equipment.

Main Technical Parameters

Nominal torque Tn: 3550 N·m
Permissible speed [n]: 3600 r/min
Bore diameter d: 30, 32, 35, 38 mm
Structure: crowned external teeth meshing with an internal gear ring

This size is a good fit for light and medium drives, for example general machinery and auxiliary fans and pumps. When selecting, verify that the calculated torque does not exceed the rating, that the working speed stays below the permissible speed, and that the shaft misalignment is within the compensation range.

With its well-designed tooth form and material selection, the GICL4 operates reliably at its load class and, with proper maintenance, delivers a long service life.