GICL14 Gear Coupling | Professional Supplier Parameters and Selection Advice

Key Takeaways:

介绍GICL14鼓形齿式联轴器的额定转矩、许可转速、轴孔范围与典型应用。

July 16, 2026 Marusaku Seiko Co. Ltd.
Tags:
GICL14 gear coupling GICL14 crowned tooth coupling gear type coupling industrial supplier GICL14 coupling selection data
Available Languages
🇬🇧 English

GICL14 Gear Coupling | Professional Supplier Parameters and Selection Advice

In the GICL drum gear coupling series, the GICL14 carries a nominal torque of 112000 N·m at a permissible speed of 1300 r/min, with bore diameters of 160, 170, 180 mm.

As an important flexible coupling family, GICL drum gear couplings are widely adopted for their adaptability and stable running, combining the reliability of rigid power transmission with the flexibility of misalignment compensation.

Main Technical Parameters

Nominal torque Tn: 112000 N·m
Permissible speed [n]: 1300 r/min
Bore diameter d: 160, 170, 180 mm
Structure: crowned external teeth meshing with an internal gear ring

This size targets heavy main machines, rolling mills and mine hoists among others, where high torque must be transmitted continuously. When selecting, verify that the calculated torque does not exceed the rating, that the working speed stays below the permissible speed, and that the shaft misalignment is within the compensation range.

With its well-designed tooth form and material selection, the GICL14 operates reliably at its load class and, with proper maintenance, delivers a long service life.

In the GICL drum gear coupling series, the GICL14 carries a nominal torque of 112000 N·m at a permissible speed of 1300 r/min, with bore diameters of 160, 170, 180 mm.

As an important flexible coupling family, GICL drum gear couplings are widely adopted for their adaptability and stable running, combining the reliability of rigid power transmission with the flexibility of misalignment compensation.

Main Technical Parameters

Nominal torque Tn: 112000 N·m
Permissible speed [n]: 1300 r/min
Bore diameter d: 160, 170, 180 mm
Structure: crowned external teeth meshing with an internal gear ring

This size targets heavy main machines, rolling mills and mine hoists among others, where high torque must be transmitted continuously. When selecting, verify that the calculated torque does not exceed the rating, that the working speed stays below the permissible speed, and that the shaft misalignment is within the compensation range.

With its well-designed tooth form and material selection, the GICL14 operates reliably at its load class and, with proper maintenance, delivers a long service life.