GICL7 Gear Coupling | Production and Manufacturing Enterprise Parameters

Key Takeaways:

介绍GICL7鼓形齿式联轴器的额定转矩、许可转速、轴孔范围与典型应用。

July 09, 2026 Marusaku Seiko Co. Ltd.
Tags:
GICL7 gear coupling GICL7 crowned tooth coupling gear type coupling manufacturing company GICL7 coupling parameters and selection
Available Languages
🇬🇧 English

GICL7 Gear Coupling | Production and Manufacturing Enterprise Parameters

The GICL7 is a size in the GICL drum gear coupling series, rated at 10000 N·m nominal torque with a permissible speed of 2680 r/min and bores of 60, 63, 65, 70, 71, 75 mm.

The GICL drum gear coupling is a semi-flexible coupling in which crowned external teeth mesh with an internal gear ring, transmitting torque while compensating for shaft misalignment. It is widely used in the shaft drives of metallurgy, mining, lifting and conveying, petrochemical, general machinery, construction machinery and power generation equipment.

Main Technical Parameters

Nominal torque Tn: 10000 N·m
Permissible speed [n]: 2680 r/min
Bore diameter d: 60, 63, 65, 70, 71, 75 mm
Structure: crowned external teeth meshing with an internal gear ring

This size is intended for medium-load service such as metallurgical and mining auxiliary machines, and lifting and conveying equipment. When selecting, verify that the calculated torque does not exceed the rating, that the working speed stays below the permissible speed, and that the shaft misalignment is within the compensation range.

With its well-designed tooth form and material selection, the GICL7 operates reliably at its load class and, with proper maintenance, delivers a long service life.

The GICL7 is a size in the GICL drum gear coupling series, rated at 10000 N·m nominal torque with a permissible speed of 2680 r/min and bores of 60, 63, 65, 70, 71, 75 mm.

The GICL drum gear coupling is a semi-flexible coupling in which crowned external teeth mesh with an internal gear ring, transmitting torque while compensating for shaft misalignment. It is widely used in the shaft drives of metallurgy, mining, lifting and conveying, petrochemical, general machinery, construction machinery and power generation equipment.

Main Technical Parameters

Nominal torque Tn: 10000 N·m
Permissible speed [n]: 2680 r/min
Bore diameter d: 60, 63, 65, 70, 71, 75 mm
Structure: crowned external teeth meshing with an internal gear ring

This size is intended for medium-load service such as metallurgical and mining auxiliary machines, and lifting and conveying equipment. When selecting, verify that the calculated torque does not exceed the rating, that the working speed stays below the permissible speed, and that the shaft misalignment is within the compensation range.

With its well-designed tooth form and material selection, the GICL7 operates reliably at its load class and, with proper maintenance, delivers a long service life.