GICL15 Gear Coupling Manufacturer | Parameters and Working Conditions

Key Takeaways:

介绍GICL15鼓形齿式联轴器的额定转矩、许可转速、轴孔范围与典型应用。

July 17, 2026 Marusaku Seiko Co. Ltd.
Tags:
GICL15 gear coupling GICL15 crowned tooth coupling gear type coupling producer GICL15 coupling torque ratings and dimensions
Available Languages
🇬🇧 English

GICL15 Gear Coupling Manufacturer | Parameters and Working Conditions

The GICL15 is a size in the GICL drum gear coupling series, rated at 160000 N·m nominal torque with a permissible speed of 1180 r/min and bores of 190, 200, 220 mm.

Drum gear couplings play a key role in mechanical drive systems; the GICL type is chosen across many industries for its high load capacity and good compensation performance, and is a common component on OEM machines.

Main Technical Parameters

Nominal torque Tn: 160000 N·m
Permissible speed [n]: 1180 r/min
Bore diameter d: 190, 200, 220 mm
Structure: crowned external teeth meshing with an internal gear ring

This size is aimed at heavy-duty main machines such as rolling mills and mine hoists that demand large torque transmission. When selecting, verify that the calculated torque does not exceed the rating, that the working speed stays below the permissible speed, and that the shaft misalignment is within the compensation range.

With its well-designed tooth form and material selection, the GICL15 operates reliably at its load class and, with proper maintenance, delivers a long service life.

The GICL15 is a size in the GICL drum gear coupling series, rated at 160000 N·m nominal torque with a permissible speed of 1180 r/min and bores of 190, 200, 220 mm.

Drum gear couplings play a key role in mechanical drive systems; the GICL type is chosen across many industries for its high load capacity and good compensation performance, and is a common component on OEM machines.

Main Technical Parameters

Nominal torque Tn: 160000 N·m
Permissible speed [n]: 1180 r/min
Bore diameter d: 190, 200, 220 mm
Structure: crowned external teeth meshing with an internal gear ring

This size is aimed at heavy-duty main machines such as rolling mills and mine hoists that demand large torque transmission. When selecting, verify that the calculated torque does not exceed the rating, that the working speed stays below the permissible speed, and that the shaft misalignment is within the compensation range.

With its well-designed tooth form and material selection, the GICL15 operates reliably at its load class and, with proper maintenance, delivers a long service life.