GICL8 Gear Coupling | Factory-Direct Specifications and Applications

Key Takeaways:

介绍GICL8鼓形齿式联轴器的额定转矩、许可转速、轴孔范围与典型应用。

July 10, 2026 Marusaku Seiko Co. Ltd.
Tags:
GICL8 gear coupling GICL8 crowned tooth coupling gear type coupling source factory GICL8 coupling spec sheet and applications
Available Languages
🇬🇧 English

GICL8 Gear Coupling | Factory-Direct Specifications and Applications

In the GICL drum gear coupling series, the GICL8 carries a nominal torque of 14000 N·m at a permissible speed of 2500 r/min, with bore diameters of 65, 70, 71, 75 mm.

As an important flexible coupling family, GICL drum gear couplings are widely adopted for their adaptability and stable running, combining the reliability of rigid power transmission with the flexibility of misalignment compensation.

Main Technical Parameters

Nominal torque Tn: 14000 N·m
Permissible speed [n]: 2500 r/min
Bore diameter d: 65, 70, 71, 75 mm
Structure: crowned external teeth meshing with an internal gear ring

This size serves medium-load applications, for example auxiliary equipment in metallurgy and mining as well as lifting and conveying machinery. When selecting, verify that the calculated torque does not exceed the rating, that the working speed stays below the permissible speed, and that the shaft misalignment is within the compensation range.

With its well-designed tooth form and material selection, the GICL8 operates reliably at its load class and, with proper maintenance, delivers a long service life.

In the GICL drum gear coupling series, the GICL8 carries a nominal torque of 14000 N·m at a permissible speed of 2500 r/min, with bore diameters of 65, 70, 71, 75 mm.

As an important flexible coupling family, GICL drum gear couplings are widely adopted for their adaptability and stable running, combining the reliability of rigid power transmission with the flexibility of misalignment compensation.

Main Technical Parameters

Nominal torque Tn: 14000 N·m
Permissible speed [n]: 2500 r/min
Bore diameter d: 65, 70, 71, 75 mm
Structure: crowned external teeth meshing with an internal gear ring

This size serves medium-load applications, for example auxiliary equipment in metallurgy and mining as well as lifting and conveying machinery. When selecting, verify that the calculated torque does not exceed the rating, that the working speed stays below the permissible speed, and that the shaft misalignment is within the compensation range.

With its well-designed tooth form and material selection, the GICL8 operates reliably at its load class and, with proper maintenance, delivers a long service life.