The GICL19 is a size in the GICL drum gear coupling series, rated at 450000 N·m nominal torque with a permissible speed of 830 r/min and bores of 260 mm.

The GICL drum gear coupling is a semi-flexible coupling in which crowned external teeth mesh with an internal gear ring, transmitting torque while compensating for shaft misalignment. It is widely used in the shaft drives of metallurgy, mining, lifting and conveying, petrochemical, general machinery, construction machinery and power generation equipment.

Main Technical Parameters

Nominal torque Tn: 450000 N·m
Permissible speed [n]: 830 r/min
Bore diameter d: 260 mm
Structure: crowned external teeth meshing with an internal gear ring

This is a heavy, low-speed, high-torque size used for high-load transmission in the shaft systems of large main machines. When selecting, verify that the calculated torque does not exceed the rating, that the working speed stays below the permissible speed, and that the shaft misalignment is within the compensation range.

With its well-designed tooth form and material selection, the GICL19 operates reliably at its load class and, with proper maintenance, delivers a long service life.